EMT Practice Test

1. Question Content...

---

Question1: Which HPE tool can you use to ensure a consistent level of firmware exists across all BladeSystem interconnects and servers in an environment?

Question2: DRAG DROP
Match the storage technology to the storage type.
Select and Place:

Question3: What has HPE implemented in the HPE ProLiant Gen10 to prevent malware?

Question4: You have completed a non-disruptive activation of firmware on an SN6000 switch.
Which session must be restarted manually?

Question5: A customer plans to use HPE ProLiant servers for line-of-business applications. They want to configure the servers to increase reliability.
Which workload profile should the customer use?

Question6: What can you do when installing a HPE switch to provide protection from electrostatic discharge?

Question7: A customer needs to support both network and storage traffic on their network, which includes Ethernet, iSCSI, and Fibre Channel devices. The customer is concerned about the large amount of cables coming from the various cards inserted in their rack servers, as well as the operational costs in their data center.
Which component addresses these issues?

Question8: You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated view of all the system health and configuration information in a single web interface.
Which HPE tool should you use?

Question9: Which statement is true regarding the drives in an internal controller on a HPE ProLiant server?

Question10: A customer is configuring their SAN.
Which types of data typically require block storage? (Choose two.)

Question11: A customer needs to share files among their Linux-based servers in a cost effective manner. The customer is concerned about compatibility with the servers in their environment that run Windows.
Which HPE StoreEasy feature addresses the customer's concerns?

Question12: creating a single virtual
A customer needs to simplify their network by creating a single virtual networking device.
Which HPE solution satisfies the customer's needs?

Question13: A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.
Which HPE server family meets the customer's needs?

Question14: A customer needs a storage array to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whether the MSA
2042 can deliver the required performance.
Which feature of MSA 2042 will help to improve iOP performance?

Question15: A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.
Which HPE solution meets this customer's requirements?

Question16: You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?

Question17: DRAG DROP
Match the correct SSD type to each given use case.
Select and Place:

Question18: A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources.
Which action should the customer take first?

Question19: You are designing a server solution that requires a significant amount of memory.
Which guideline should you keep in mind when working with memory channels?

Question20: DRAG DROP
Match the industry trend with its use case.
Select and Place:

Question21: A customer has reported that while running an application that is streaming live data, they experience fluctuations in processor frequency as they increase the server performance.
Which HPE ProLiant Gen10 system tuning feature would help eliminate this issue?

Question22: A customer wants to decrease problem resolution time on their HPE infrastructure.
Why would this customer benefit from Insight Remote Support?

Question23: A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality.
Which HPE product family will meet this customer's needs?

Question24: A customer needs a Layer 2 switch that provides basic switch functionality without the need to use a CLI or a GUI. Which type of switch meets the customer's needs?

Question25: A customer has an application that consumes 500 GB storage and requires a RTO and RPO of 15 minutes. Which backup and recovery technology enables the customer to meet their requirements in the most cost-effective manner?

Question26: You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.)

Question27: A customer wants to safeguard their server firmware and asks you about the HPE ProLiant Gen10 features that provide this level of security.
Which Gen10 feature best addresses the customer's concern?

Question28: A customer requires 12 Gb local storage for their VMware boot volumes, which require high-performance read cycles to enable the operating system to boot quickly.
Which drive type provides the most appropriate size and most cost-effective way to meet this requirement?

Question29: You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array.
What should you explain to this customer?

Question30: DRAG DROP
A customer is expanding from local storage to a SAN environment for the first time. They plan to future- proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.
Select and Place:

Question31: A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their choice of network operating system.
Which HPE product family will meet the customer's needs?

Question32: You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 °C (113 °F).
Which additional option is required?

Question33: A customer needs to enable HPE Proactive Care and automated case creation for server hardware failures in their OneView environment.
Which step do you need to complete in OneView to accomplish these tasks?

Question34: You are installing a HPE ProLiant server that has a shared network port for iLO and NIC teaming. You need to ensure that you can still access iLO after configuring the NIC team.
Which teaming technology should you configure?

Question35: You are installing additional components to a server.
Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?

Question36: A customer requires a MSA storage system that they use for archiving data. The system needs to provide a large amount of storage.
Which drive type meets the customer's needs?

Question37: You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

Question38: You are installing a server solution in a customer's data center.
How can you ensure that the installation complies with relevant electrical best practices? (Choose two.)

Question39: You plan to perform maintenance on several systems in a rack. You need to ensure that the rack does not tip when you are working on the equipment.
What should you use?

Question40: Which methods can you use to configure HPE ProLiant servers? (Choose three.)

Question41: You need to configure a HPE ProLiant server and plan to install an operating system that supports Secure Boot.
Which system utility should you use to configure the server?

Question42: You are troubleshooting HPE ProLiant servers for a customer. The customer has granted you read-only access to HPE OneView. You need to download the audit log from OneView.
Which permission level should the customer give you?

Question43: A customer needs an eight-port switch with Power over Ethernet (PoE) functionality and 1 Gb copper connectivity. They have limited IT resources, so they require a convenient Layer 3 access switch that sets up quickly with Zero Touch Deployment.
Which HPE product family will meet the customer's needs?

Question44: You are designing a system for a customer that has a contract with a government agency. The contract requires the highest level of security algorithms possible.
Which HPE ProLiant Gen10 feature set will address this customer's needs?

Question45: A server administrator needs to see the 24-hour history of the power consumed by an installed HPE ProLiant server.
Which HPE tool can the admin use to gather this information?

Question46: A customer is planning an upgrade to their network. They need to combine multiple existing switches into one virtual device.
Which technology should the customer configure on their existing switches?

Question47: A fast-growing customer with a NAS-based storage solution is evaluating Fibre Channel storage for their VMware environment.
How would this customer benefit from adding 16 Gb Fibre Channel storage to their environment? (Choose two.)

Question48: You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans constantly run at
100%.
Which action should you take first?

Question49: A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.
Which HPE management offering meets the customer's needs?

Question50: You are installing new drives into the internal cage of a HPE ProLiant DL380 server.
How is the drive device number set?

Question51: Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity drives?

Question52: You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch.
What must you do to install the firmware on the second switch?

Question53: Which two HPE applications are installed on Windows operating systems with intelligent Provisioning?
(Choose two.)

Question54: A customer has implemented an HPE ProLiant server with internal storage and needs to monitor the array health status.
Which management application can the customer use to discover errors quickly and minimize the possible downtime?

Question55: You are creating an internal array on an HPE ProLiant server.
What can you do to maximize the storage space efficiency?

Question56: DRAG DROP
Match the storage technology to the storage type.
Select and Place:

Question57: DRAG DROP
Match the command to the action it initiates on a FlexFabric switch. Not all actions will be used.
Select and Place:

Question58: A customer is planning an upgrade in their data center. The customer needs to deploy on bare-metal and virtual servers easily through a common interface. In addition, they have expressed an interest in software- defined storage.\
Which HPE compute platform should you suggest?

Question59: You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.
Which HPE management solution meets the customer's needs?

Question60: A company plans to purchase new HPE servers. The company needs to maximize local storage capacity within the servers. Which HPE servers should the company install?

Question61: A customer needs to virtualize their storage across physical servers and storage environments.
Which HPE solution meets the customer's needs?

Question62: DRAG DROP
Match each workload profile description with the corresponding profile.
Select and Place:

Question63: A customer plans to back up a file server that holds 2 TB of data. The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network solution.
Which solutions would HPE recommend to meet the customer needs? (Choose two.)

Question64: A customer needs to know if the storage solution you proposed contains components that are compatible with existing products currently in the data center.
Which HPE resource should you use to provide this information?

Question65: You are installing a HPE StoreOnce backup system in a customer's environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer's requirements?

Question66: In which layer of the OSI model would you find an IP address?

Question67: Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

Question68: A customer has a HPE OneView environment and has added all their HPE ProLiant servers and enclosures.
Which benefits does a customer gain by configuring Remote Support on their environment? (Choose two.)

Question69: A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:
Multi-protocol connectivity

Flash-accelerated storage

Low-cost midline SAS drives

Which HPE storage platform will meet these requirements?

Question70: When installing servers in a rack, a customer has left gaps between the servers.
What should you tell this customer regarding the space between servers? (Choose two.)